try a 70cc's polini cilinder.. (with 6 sides) runs about 110/120 with a 19mm carb
(personally i would go for a 21 or larger carb)
(if they're stil available
)
| Apriliaforum.nl https://apriliaforum.nl/ |
|
| Aprilia af1 sintesi https://apriliaforum.nl/viewtopic.php?f=8&t=9391 |
Pagina 1 van 1 |
| Auteur: | Aprilia af1 [ ma maart 17, 2008 6:52 pm ] |
| Berichttitel: | Aprilia af1 sintesi |
Hi i don't know if i am posting in the right part of the forum but i'll try anyway. I just wanted to know if anyone knows of any good performance parts for the aprilia af1 rv6 or rv4 engines, if you know of any fast cylinders, carbs, exhausts, front or rear sprockets it would be a great help, because people i know have rs50's, rieju rs1's and derbi gpr50's and i can't keep up with them, also i was looking for a speed of around 80mph or faster with parts an gearing. All help is appreciated. Thanks. |
|
| Auteur: | Itakura [ ma maart 17, 2008 8:15 pm ] |
| Berichttitel: | |
try a 70cc's polini cilinder.. (with 6 sides) runs about 110/120 with a 19mm carb (personally i would go for a 21 or larger carb)
(if they're stil available )
|
|
| Auteur: | Aprilia af1 [ ma maart 17, 2008 8:56 pm ] |
| Berichttitel: | |
Hi i have seen a polini 70cc cast iron, would this be a quick cylinder, if you look on ebay.de you may see it, it's about 185 euros, also what do mean by 6 sides. also with a 15 tooth front sprocket 21 or 24mm carb and exhaust what speed should it run at Thanks for the help. |
|
| Auteur: | Itakura [ ma maart 17, 2008 9:11 pm ] |
| Berichttitel: | |
if you look at the picture you can see six sides on the cilinder... for rv4 engines, some have 4, some have 6 sided cilinders. if you want to know how fast your moped will run with let's say 12.000 rpm in last gear there is a special topic that shows that. http://www.apriliaforum.nl/viewtopic.php?t=2362 if you want your moped to run fast but still consume less fuel, you should go for an 19 or 21 mm... if the amount of fuel doesn't matter, i suggest you go for an 24 or an 28 mm carb. a good exhaust for 70cc's is a yasuni HMR/2 I think that if you take this set, your moped will run around 110 to 140 km/h. that depends on the size of your sprockets and how well it's been adjusted. |
|
| Auteur: | Aprilia af1 [ ma maart 17, 2008 9:44 pm ] |
| Berichttitel: | |
Hi thanks for the information, on the picture i can't see 6 sides unless you mean the top, bottom and four sides, also the polini i would be getting would be a round cylinder for the rv4 and rv6 engines and is cast iron, but if you know of anyone selling one of the polini 6 sided cylinder kits quite cheap please let me know, finally just wondered if you know anything about derbi gpr50's 2003 earlier shape models, E.G speed with 15 tooth front sprocket, 52 rear, polini 80cc cast iron,19mm carb, and an arrow exhaust. 12000rpm, don't worry if you don't know anything, just wanted to see what the speed difference would be compared to the setup i suggested for the af1. |
|
| Auteur: | Itakura [ ma maart 17, 2008 9:52 pm ] |
| Berichttitel: | |
well, i drive an af1 myself too, (the replica '88) with an am6 engine, i've got a 14 tooth front sprocket and a 38 tooth rear sprocket. this gives me the speed of around 130/135 km/h. if that's the same with an rv4 engine or a derbi, i dont know. what i do know is that the derbi is much lighter because the frame is made of aluminium ( true? ) and the af1 has a steel frame. (the cilinder has flattened corners that i saw as "sides" ) we use that term to know witch shape we're talking about 
the link is a bit large, but it works on my pc ... this is the same cilinder i'm talking about. http://motor-brommer.marktplaats.nl/ond ... to_image=1 |
|
| Auteur: | Aprilia af1 [ ma maart 17, 2008 10:48 pm ] |
| Berichttitel: | |
Thanks for the info it has helped a lot. Well ithink the am6 engine is a little faster than my rv6 as thomasrs50 on the forum worked out that the am6 revs 62 or 63 rpm more than the rv6 on the front sprocket at 10,000rpm. the link did work and it's the same kit which is under the for sale section on the forum? What set up do you have to perform 130/135km/h? i know you have the am6 but it will be a rough guide for my rv6, also i have the same aprilia af1 as you, sintesi but mine is a 92 replica, one of the last af1's i think? |
|
| Auteur: | Itakura [ di maart 18, 2008 12:02 pm ] |
| Berichttitel: | |
I've got on my am6 engine a Gilardroni 74cc's cilnder with a 24mm OKO carb (D-Slide) provided with a Hebo Power filter. the exhaust's brand i don't know but the inner diameter of the pipe that goes into the cilnder is 32 mm. you mean the AF1 Futura  for all i know the sintesi was only built in 1988 and 1989... but maybe i'm wrong... the Futura was built in 1991 and 1992.
this site gives you information on all aprilia's from moped to motorbike like manuels and exploded views. www.aprilia-parts.nl good luck
|
|
| Auteur: | jasper08 [ di maart 18, 2008 4:12 pm ] |
| Berichttitel: | |
Citaat: if you look at the picture you can see six sides on the cilinder... for rv4 engines, some have 4, some have 6 sided cilinders wow Itakura:P jij kan goed tellen:P volgens mij is dat een 8hoekige Gila:P |
|
| Auteur: | Itakura [ di maart 18, 2008 5:24 pm ] |
| Berichttitel: | |
whaha  nu je et zegt  maar het is geen gila... het is een polini
|
|
| Auteur: | Aprilia af1 [ di maart 18, 2008 10:25 pm ] |
| Berichttitel: | |
Hi well my fairings say sintesi on them as it is the same colours as it's meant to be but has a number 4 on the back. and the bike came with an rv3. |
|
| Auteur: | jasper08 [ di maart 18, 2008 11:09 pm ] |
| Berichttitel: | |
nou dat kon ik niet zien:P,.. wel dat ie 8 hoeken had:P 
|
|
| Pagina 1 van 1 | Alle tijden zijn GMT + 1 uur [ Zomertijd ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|